Important: This version of the e-Laws website will be upgraded to a new version in the coming weeks.
You can try the beta version of the new e-Laws at ontario.ca/laws-beta.
O. Reg. 134/05: PROCEEDINGS COMMENCED BY CERTIFICATE OF OFFENCE
filed March 24, 2005 under Provincial Offences Act, R.S.O. 1990, c. P.33
Skip to contentontario regulation 134/05
made under the
provincial offences act
Made: March 23, 2005
Filed: March 24, 2005
Printed in The Ontario Gazette: April 9, 2005
Amending Reg. 950 of R.R.O. 1990
(Proceedings Commenced by Certificate of Offence)
1. Schedule 55.1 to Regulation 950 of the Revised Regulations of Ontario, 1990 is revoked and the following substituted:
Schedule 55.1
Ontario Regulation 363/04 under the Highway Traffic Act
|
Item |
Column 1 |
Column 2 |
|
1. |
Fail to properly secure load on sides, end |
clause 5 (1) (a) |
|
2. |
Fail to have required number of tiedowns |
clause 5 (1) (b) |
|
3. |
Fail to secure load to prevent shift forward |
subsection 5 (3) |
|
4. |
Fail to properly block or brace load on sides |
clause 5 (3) (a) |
|
5. |
Use defective or damaged tiedown |
subsection 6 (4) |
|
6. |
Fail to secure “over-the-centre” tiedown tensioner by adequate secondary means |
subsection 6 (5) |
|
7. |
Fail to secure load — required by National Standard, Part 1 |
subsection 9 (1) |
|
8. |
Use defective or damaged tiedown — contrary to National Standard, Part 1 |
subsection 9 (1) |
|
9. |
Securement system fails to meet aggregate working load limit — required by National Standard, Part 1 |
subsection 9 (1) |
|
10. |
Securement system fails to meet aggregate working load limit — required by National Standard, Part 1 — commercial motor vehicle over 4,500 kg |
subsection 9 (1) |
|
11. |
Fail to prevent load from rolling — required by National Standard, Part 1 |
subsection 9 (1) |
|
12. |
Fail to prevent load from rolling — required by National Standard, Part 1 — commercial motor vehicle over 4,500 kg |
subsection 9 (1) |
|
13. |
Driver fails to ensure tiedowns taut — required by National Standard, Part 1 |
subsection 9 (1) |
|
14. |
Driver fails to ensure tiedowns taut — required by National Standard, Part 1 — commercial motor vehicle over 4,500 kg |
subsection 9 (1) |
|
15. |
Fail to use adequate edge protector — required by National Standard, Part 1 |
subsection 9 (1) |
|
16. |
Fail to use adequate edge protector — required by National Standard, Part 1 — commercial motor vehicle over 4,500 kg |
subsection 9 (1) |
|
17. |
Fail to have proper number of tiedowns — required by National Standard, Part 1 |
subsection 9 (1) |
|
18. |
Fail to properly secure load — required by National Standard, Part 2 |
subsection 9 (2) |
|
19. |
Fail to properly secure load — required by National Standard, Part 2 — commercial motor vehicle over 4,500 kg |
subsection 9 (2) |