O. Reg. 304/07: Mine Development and Closure under Part VII of the Act

 

ontario regulation 304/07

made under the

mining act

Made: June 27, 2007
Filed: July 3, 2007
Published on e-Laws: July 4, 2007
Printed in The Ontario Gazette: July 21, 2007

Amending O. Reg. 240/00

(Mine Development and Closure under Part VII of the Act)

1. Subsection 5 (1) of Ontario Regulation 240/00 is amended by striking out “Form 6 of Ontario Regulation 111/91” and substituting “Form 1 of Ontario Regulation 195/06 (Forms) made under the Act”.

2. Section 6 of the Regulation is amended by striking out “Form 7 of Ontario Regulation 111/91” and substituting “Form 2 of Ontario Regulation 195/06 (Forms) made under the Act”.

3. (1) Subsection 10 (1) of the Regulation is amended by striking out “Form 8 of Ontario Regulation 111/91” at the end and substituting “Form 3 of Ontario Regulation 195/06 (Forms) made under the Act”.

(2) Subsection 10 (2) of the Regulation is amended by striking out “Form 9 of Ontario Regulation 111/91” at the end and substituting “Form 4 of Ontario Regulation 195/06 (Forms) made under the Act”.

(3) Subsection 10 (3) of the Regulation is amended by striking out “Form 10 of Ontario Regulation 111/91” at the end and substituting “Form 5 of Ontario Regulation 195/06 (Forms) made under the Act”.

4. Section 26 of Schedule 1 of the Regulation is amended by adding the following clause:

(a.1) shall be constructed in accordance with,

(i) the drawing entitled “Fence, Chain-link: Component — Barbed Wire” and identified as OPSD-972.101,

(ii) the drawing entitled “Fence, Chain-link: Component — Gate” and identified as OPSD-972.102, and

(iii) the drawing entitled “Fence, Chain-link: Installation — Roadway” and identified as OPSD-972.130,

in Volume 3 of the Ontario Provincial Standards for Roads and Public Works, published by the Ministry of Transportation;

5. This Regulation comes into force on the day it is filed.