ontario regulation 159/02

made under the

highway traffic act

Made: May 16, 2002
Filed: May 17, 2002

Amending O. Reg. 103/97

(Standards to Determine Allowable
Gross Vehicle Weight for Bridges)

1. (1) The definition of “bridge” in section 1 of Ontario Regulation 103/97 is revoked.

(2) Section 1 of the Regulation is amended by adding the following definition:

“Canadian Highway Bridge Design Code” means the “Canadian Highway Bridge Design Code” designated as CAN/CSA-S6-00 published by the Canadian Standards Association and the “Commentary on CAN/CSA-S6-00, the Canadian Highway Bridge Design Code” published by the Canadian Standards Association, as they may be amended from time to time;

(3) The definition of “Ontario Highway Bridge Design Code” in section 1 of the Regulation is revoked.

(4) The definition of “professional engineer” in section 1 of the Regulation is revoked and the following substituted:

“professional engineer” means a person who holds a licence or a temporary licence issued under the Professional Engineers Act to engage in the practice of professional engineering, but does not include a person who holds a limited licence issued under that Act.

2. (1) Clause 2 (a) of the Regulation is amended by striking out “Ontario Highway Bridge Design Code” and substituting “Canadian Highway Bridge Design Code”.

(2) Clause 2 (b) of the Regulation is amended by striking out “who have set out” and substituting “who have determined and set out”.

 

Norman W. Sterling

Minister of Transportation

Dated on May 16, 2002.

22/02