Important: Please use the beta version of the new e-Laws at ontario.ca/laws-beta. This version of the e-Laws website will be discontinued in the coming weeks.
O. Reg. 60/18: INDUSTRIAL ESTABLISHMENTS
filed March 2, 2018 under Occupational Health and Safety Act, R.S.O. 1990, c. O.1
Skip to contentontario regulation 60/18
made under the
Occupational Health and Safety Act
Made: February 21, 2018
Filed: March 2, 2018
Published on e-Laws: March 2, 2018
Printed in The Ontario Gazette: March 17, 2018
Amending Reg. 851 of R.R.O. 1990
(INDUSTRIAL ESTABLISHMENTS)
1. The definitions of “architect” and “Building Code” in section 1 of Regulation 851 of the Revised Regulations of Ontario, 1990 are revoked.
2. Section 10 of the Regulation is revoked.
3. Section 42.2 of the Regulation is revoked and the following substituted:
42.2 Work performed on electrical transmission systems or outdoor distribution systems rated at more than 750 volts shall be performed in accordance with the document entitled “Electrical Utility Safety Rules”, published by the Infrastructure Health and Safety Association and revised in 2014.
4. The Table to subsection 90 (1) of the Regulation is revoked and the following substituted:
TABLE
Type of Metal Container |
Number of Workers Conveying Metal |
Minimum Width |
Hand shank ladles and crucibles |
2 or less |
90 centimetres |
Hand shank ladles and crucibles |
More than 2 |
120 centimetres |
Ladle or crucible on truck, buggy or overhead track |
Not applicable |
60 centimetres wider than greatest width of ladle, crucible, truck, buggy or container support |
5. The definition of “registered” in subsection 104 (2) of the Regulation is amended by striking out “Ministry of Training, Colleges and Universities” and substituting “Ministry of Advanced Education and Skills Development”.
6. (1) Subsection 105 (1) of the Regulation is amended by striking out “Ministry of Training, Colleges and Universities” in the portion before paragraph 1 and substituting “Ministry of Advanced Education and Skills Development”.
(2) Subsection 105 (2) of the Regulation is amended by striking out “Ministry of Training, Colleges and Universities” and substituting “Ministry of Advanced Education and Skills Development”.
(3) Subsection 105 (3) of the Regulation is revoked.
7. (1) Subsection 106 (3) of the Regulation is revoked.
(2) Subsection 106 (4) of the Regulation is amended by striking out “or (3)” after “subsection (2)”.
8. (1) Subsection 106.1 (3) of the Regulation is revoked.
(2) Subsection 106.1 (4) of the Regulation is amended by striking out “or (3)” after “subsection (2)”.
9. Subsection 106.2 (2) of the Regulation is revoked.
10. Form 2 of the Regulation is revoked.
Commencement
11. This Regulation comes into force on the day it is filed.